PRODUCT FEATURES

FS11 Negative Ion Generator Module

Stable Negative-Ion Generation: Controlled −3,000 to −4,000 V high-voltage output supports active air-treatment applications.
Automotive 12 V Operation: Designed for 9–16 VDC systems with ≤70 mA operating and ≤5 mA standby current at 12 VDC.
LIN Control and Diagnostics: A 19.2 kbit/s LIN slave-node interface provides command, operating-status and fault-diagnostic access.
Wide Environmental Operating Range: Operation from −30°C to 85°C, storage from −30°C to 90°C, and 35–85% RH.

TECHNICAL DATA

FS11 Negative Ion Generator Module Specifications

Electrical & Ion Output

Product Name: FS11 Negative Ion Generator Module
Model: FS11
Rated Voltage: 12 VDC
Operating Voltage: 9–16 VDC
Operating Current: ≤70 mA
Standby Current: ≤5 mA
High-Voltage Output: −3,000 to −4,000 V
Ion Output: Negative ions
Ozone Concentration: ≤0.05 ppm

Communication & Environmental

Control Method: LIN communication
LIN Communication Voltage: 8–18 V
Node Type: Slave node
Baud Rate: 19.2 kbit/s
Baud-Rate Deviation: ±1.5%
LIN Transceiver: TJA1028 / NXP
Operating Temperature: −30°C to 85°C
Storage Temperature: −30°C to 90°C
Operating Humidity: 35–85% RH

Test conditions: Negative-ion output is evaluated at 3 m/s airflow, 20 cm from the carbon-brush emitter, at 12 VDC. Actual performance may vary with airflow, distance and installation.

OEM INTEGRATION

Interface & LIN Control

The FS11 uses a 3-pin interface for vehicle power, ground and bidirectional LIN communication. Its integrated transceiver connects to the host without an external pull-up resistor.