R290 Leak Detection
A3 propane monitoring across a 0–100% LFL measurement range.
Bring dedicated NDIR refrigerant sensing into vehicle HVAC and EV thermal management projects. MAXMAC R2 measures R290 propane for flammable-gas monitoring, while R3 measures R744 / CO₂ concentration. Connect the selected sensor with the vehicle controller and validate the sensing location, environmental conditions and warning or equipment-response logic for the platform.
A3 propane monitoring across a 0–100% LFL measurement range.
CO2 refrigerant monitoring for automotive HVAC and cabin safety.
RS485 with customizable LIN 2.1 and CAN interface options.
For propane refrigerant leak detection in EV heat pump HVAC and thermal management systems.
CO2 concentration inputs for R744 vehicle projects; specified sensor operating range: 0°C to 50°C.
Choose the sensing channel for the refrigerant: R2 monitors A3 R290 propane in %LFL, and R3 monitors A1 R744 carbon dioxide in ppm. Both use NDIR technology, with separate gas-specific products and specifications.
For R2, factory validation includes 100+ precisely controlled concentration points and a 1,200-hour powered endurance test for the first pilot-production batch. Review the R290 calibration and reliability testing and R744 product capabilities for the selected device.
Standard RS485 and customizable LIN 2.1 or CAN interfaces support host integration. Match the sensor’s actual measurement range and operating conditions to the installation, then validate vehicle-level detection and response behavior.
R290 is A3 propane; R744 is A1 carbon dioxide. R2 and R3 are separate gas-specific sensors, with different measurement units and operating conditions.
| Refrigerant | MAXMAC Product | Main Safety Risk | Sensor Output Focus | Typical Vehicle Application |
|---|---|---|---|---|
| R290 / Propane (A3) | R2 | A3 flammable refrigerant leakage | %LFL | EV heat pump HVAC, cabin safety, thermal management |
| R744 / CO2 (A1) | R3 | Excessive CO2 concentration in enclosed spaces | ppm | CO2 heat pump HVAC, cabin leak monitoring, passenger safety |
MAXMAC R2 is an automotive-grade A3 R290 refrigerant leak detection sensor designed for EV heat pump HVAC and thermal management systems. Based on NDIR technology, it measures R290 concentration from 0-100% LFL with 0.1% LFL resolution and fast response.
Review all three accuracy bands and operating specifications. R2 supports measurement under condensing conditions; its stated response metric is a sensor specification, with vehicle response also dependent on sampling, communication and controller logic.
Explore R290 Sensors & Specifications
MAXMAC R3 uses NDIR sensing to measure CO2 concentration for R744 refrigerant monitoring projects. The vehicle controller evaluates readings and determines its configured warning or equipment response. The selected mounting location must remain within the sensor’s specified 0°C to 50°C, non-condensing operating conditions.
CO₂ readings alone do not identify the gas source. Cabin monitoring must account for occupant-generated CO₂, airflow and the possible leak path. Review R3 specifications and confirm the mounting environment and detection strategy for the vehicle project.
Explore R744 Sensors & Specifications
Select R2 for R290 or R3 for R744, according to the vehicle’s refrigerant circuit and the sensor’s specified installation conditions.
Evaluate possible refrigerant ingress paths and airflow. R744 CO₂ readings require interpretation alongside occupant and ventilation conditions.
Provide concentration inputs to the thermal management controller; refrigerant pressure and circuit diagnostics require their own measurements.
Evaluate packaging, environmental conditions and integration requirements for the specific bus, truck or van platform.
The ECU evaluates sensor signals and executes the project-defined warning, ventilation or equipment-control strategy.
Use samples to assess gas response, sensing location, electrical compatibility and controller behavior before vehicle-level qualification.
Connect the selected gas sensor to the vehicle HVAC ECU or thermal management controller. Standard RS485 is available; LIN 2.1 and CAN are customization options whose electrical interface, messages and diagnostics must be agreed for the project. Use the automotive R290 thermal management article when reviewing refrigerant routing and safety architecture.
Available for engineering validation, test platforms, and customized control architectures.
Define the LIN interface and message mapping for the selected vehicle project; customization is confirmed before integration.
Define CAN messages, data handling and supported diagnostics with the receiving thermal management controller.
Designed for compact embedded control systems and vehicle-mounted electronics.
Position the sensing inlet along an evaluated gas-leak path. These concentration measurements are distinct from refrigerant-circuit pressure measurement.
Share your refrigerant, mounting environment and vehicle interface. Our team can help you review R2 / R3 selection, customization and sample evaluation.